Our Products Manipulators Evaporators Probe Stations Encoder Options Controls & Automation Target Sample Holders Heating & Cooling Transfer Devices Chamber Accessories Hat Washers Miscellaneous Capabilities and Products Search Products About Us Contact Us
MC6000
MC6000

With 14.0″ (DN295CF) Flanges

Dimensions are in inches (mm)

Contact Factory for Encoder Options

  • XY Travel:
    • ± 0.5" (12.5)
    • ± 1.0" (25)
    • ± 2.0" (50)
  • Drive:
    • Manual Control (Standard)
    • Motorized And Controlled (Contact Factory)
  • Top Flange Hole Options:
    • Clearance Holes (Standard)
    • Tapped Inch
    • Tapped Metric
  • Bottom Flange Hole Options:
    • Clearance Holes (Standard)
    • Tapped Inch
    • Tapped Metric
  • Horizontal Mounting Kit Option:

Product Description

The MC-series platforms are available in ± 2.0" (± 50 mm), ± 1.0" (± 25 mm) and ± 0.5″ (± 12.5 mm) travel with a circular pattern, offered in both manual and stepper motorized versions. Conversion from micrometers to stepper motors can be completed in 15 minutes at the user’s site, as detailed in the user’s manual.

The MC-series ranges from the large MC6000, to the smaller MC1500, and the compact MC1000. Unique features include a ±2° tilt adjustment on the top flange, and the ability to mount the X-axis micrometer (or motor) on either side, which is standard.

Expandable

One key advantage of the MC6000 is the cost savings when long Z Axis strokes are required. Since only the bellows in the XY portion need to be larger than the probe, users can extend the Z Axis stroke using a smaller diameter (and less costly) bellows that clears the probe. Custom configurations are also available to meet specific requirements.

To select a model, add the total travel required in the X or Y axis to the maximum diameter of the device passing through the MC6000. This sum determines the minimum bellows inside diameter (ID).

Select the Z-axis translator that best matches your device to complete your XYZ sample manipulator.