Product Description
All BLT66s use double ball bearings on the jacking screws. The screws and bearings are lubricated with high temperature grease for low friction and long life. All parts are field replaceable. The traveling flange is supported by three jacking screws and aligned by three guide rods and actuated with an included ratchet wrench. All translators are also available with long strokes, motor drives, linear encoders, tapped flanges, and special heights.
Model BLT66 Translator Dimensions
Model | Stroke | OAL Compressed |
---|---|---|
BLT66-2 | 2″ (50) | 3.40″ (86) |
BLT66-3 | 3″ (75) | 3.55″ (90) |
BLT66-4 | 4″ (100) | 3.70″ (94) |
BLT66-6 | 6″ (150) | 4.00″ (100) |
BLT66-8 | 8″ (200) | 4.30″ (109) |
BLT66-10 | 10″ (250) | 4.60″ (117) |
Clear ID: 4.00″ (100)
Digital Readout Option
- Yes
Drive
- Manual (Standard)
- 4 Wire Stepper Motor w/Flying Leads
- Integrated Motion Control Stepper Motor
- Integrated Motion Control Stepper w/Controller (first axis)
- DC Motor
- DC Motor w/Pendant and Controller
- Motor Mounts and Limit Switches Only (no motor)
Top Flange Hole Options
- Clearance Holes Standard
- 5/16-24
- M8
Bottom Flange Hole Options
- Clearance Holes Standard
- 5/16-24
- M8