Product Description
All BLT45 translators have ball bearings on the jacking screws. Even on motorized versions, manual actuation via the provided ratchet wrench is available. The screws and bearings are lubricated with high temperature grease for low friction and long life. All parts are field replaceable. The traveling flange is supported by three jacking screws. All translators are also available with long strokes, motor drives, linear encoders, tapped flanges, and special heights.
Model BLT456 Translator Dimensions
| Model | Stroke | OAL Compressed |
|---|---|---|
| BLT456-2 | 2″ (50) | 3.2″ (81) |
| BLT456-3 | 3″ (75) | 3.35″ (85) |
| BLT456-4 | 4″ (100) | 3.5″ (89) |
| BLT456-6 | 6″ (150) | 3.8″ (97) |
| BLT456-8 | 8″ (200) | 4.1″ (105) |
Clear ID: 2.87″ (73)
Digital Readout Option
- Yes
Drive
- Manual (Standard)
- 4 Wire Stepper Motor w/Flying Leads
- Integrated Motion Control Stepper Motor
- Integrated Motion Control Stepper w/Controller (first axis)
- DC Motor
- DC Motor w/Pendant and Controller
- Motor Mounts and Limit Switches Only (no motor)
Top Flange Hole Options
- Clearance Holes Standard
- 5/16-24
- M8 X 1.25
Bottom Flange Hole Options
- Clearance Holes Standard
- 5/16-24
- M8 X 1.25