With 6.0″ (DN100CF) Flanges
Dimensions are in inches (mm)
Clearance ID 4.0″ (100)
Product Description
They are available in both ± 1.0 (± 25 mm) and ± 0.5″ (± 12.5 mm) travel,circular pattern, with both manual and stepper motorized versions. In fact, conversion from micrometers to stepper motors can be done in 15 minutes at the user’s site.
The entire MC-series ranges in size from the very large MC3000, through the MC2000 shown here, to the smaller MC1500 and, finally, the compact MC1000. They have features not found on translators available elsewhere. These include ±2° tilt adjustment on the top flange, and the ability to mount the X-axis micrometer (or motor) on either side, which are standard
Expandable
One distinct advantage of the MC2000 is the cost savings when long Z Axis strokes are required. Since only the bellows in the XY portion needs to be larger than the probe, the user can extend the Z Axis stroke using a smaller diameter (less costly) bellows that just clears the probe running through it. Simply select the model below that best suits your needs.
The MC2000-series manipulator is also available with virtual-axis adjustment to allow eucentric sample tilt / rotation, even if the sample is 12-40″ (300-1000 mm) away from the actual manipulator. Contact the factory with your specifications and for a detailed discussion.
For horizontal mounting, i.e., with the flange faces vertical, dual constant force counterbalance springs are available that compensate for gravitational loads. If required, this feature can be added in the field, after the user accurately determines the weight of the devices to be mounted.
To make your selection, add the total travel required in either the X or Y axis to the maximum diameter of the device that will pass through the MC2000. This sum determines the minimum bellows inside diameter (ID).
Next, select the bottom flange that best mates to your chamber or other equipment. While the most common size is 6″ OD (CF100), either tapped or non-tapped flange sizes of 4½” (CF63), 8″ (CF150) and larger are available. Consult the factory for more information.
Now you are ready to select a Z axis translator that best mates to the device to be manipulated, to complete your XYZ sample manipulator.
Related Products
-
MC3000
Starting At $11,975.00Circular Pattern vs. Square Pattern
XY Manipulator motions are defined as either Circular Pattern (sometimes called Vector Sum) or as Square Pattern.
For example, a manipulator with a ±0.5″ (±12.5 mm) of XY travel, Circular Pattern, will move the center of the translated device anywhere within a 1″ (25 mm) circle, as shown in the graphic, below. Note that the radial offset (the sum of the vectors) will remain constant while the individual X and Y offsets vary. For a manipulator with ±1.0″ (±25 mm) of XY travel, Circular Pattern, the values will be twice that of the ±0.5″ (±12.5 mm) values but the relationships will persist.
Unless specified otherwise, all MTS manipulators, as well as all other manufacturer’s manipulators are circular pattern. Also, the minimum bellows ID must equal twice the radial offset plus the diameter of the device to be translated. Be sure to keep this in mind when specifying a manipulator.
A manipulator with ±0.5″ (±12.5 mm) of XY travel, Square Pattern, will move the center of the translated device anywhere within a 1″ square so that when both the X and Y orthogonal offsets are at 0.5″ (12.5 mm), the bellows is actually offset 0.707″ (18 mm). As above, for a manipulator with ±1.0″ (±25 mm) of XY travel, the values will be twice that of the ±0.5″ (±12.5 mm) values, but the relationships will persist.
Manual (Standard)Comes standard with Handwheel.
4-Wire Stepper Motor w/Flying LeadsHigh torque 1.8° 4-wire stepper motor, mounts & limit switches.
Customer supplies all drive electronics & wiring.
Integrated Motion Control Stepper MotorHigh torque 1.8° stepper motor with Integrated Motion Control and Driver Electronics.
Customer supplies communications & wiring.
Integrated Motion Control Stepper w/Controller (first axis)Includes power supply, Windows PC software, USB communications, motor pre-programming & all wiring and connectors.
DC MotorHigh torque 12 VDC gearmotor, mounts & limit switches.
Customer supplies all controls & wiring.
DC Motor w/Pendant & ControllerIncludes 12 VDC power supply, hand held pendant & all wiring and connectors.
Motor Mounts & Limit Switches only (no motor)- Nema 23 motor mount.
- Customer supplied motor.
- Consult factory for compatibility.
Manual (Standard)Comes standard with Handwheel.
4-Wire Stepper Motor w/Flying LeadsHigh torque 1.8° 4-wire stepper motor, mounts & limit switches.
Customer supplies all drive electronics & wiring.
Integrated Motion Control Stepper MotorHigh torque 1.8° stepper motor with Integrated Motion Control and Driver Electronics.
Customer supplies communications & wiring.
Integrated Motion Control Stepper w/Controller (first axis)Includes power supply, Windows PC software, USB communications, motor pre-programming & all wiring and connectors.
DC MotorHigh torque 12 VDC gearmotor, mounts & limit switches.
Customer supplies all controls & wiring.
DC Motor w/Pendant & ControllerIncludes 12 VDC power supply, hand held pendant & all wiring and connectors.
Motor Mounts & Limit Switches only (no motor)- Nema 23 motor mount.
- Customer supplied motor.
- Consult factory for compatibility.
Manual (Standard)Comes standard with Handwheel.
4-Wire Stepper Motor w/Flying LeadsHigh torque 1.8° 4-wire stepper motor, mounts & limit switches.
Customer supplies all drive electronics & wiring.
Integrated Motion Control Stepper MotorHigh torque 1.8° stepper motor with Integrated Motion Control and Driver Electronics.
Customer supplies communications & wiring.
Integrated Motion Control Stepper w/Controller (first axis)Includes power supply, Windows PC software, USB communications, motor pre-programming & all wiring and connectors.
DC MotorHigh torque 12 VDC gearmotor, mounts & limit switches.
Customer supplies all controls & wiring.
DC Motor w/Pendant & ControllerIncludes 12 VDC power supply, hand held pendant & all wiring and connectors.
Motor Mounts & Limit Switches only (no motor)- Nema 23 motor mount.
- Customer supplied motor.
- Consult factory for compatibility.
Manual (Standard)Comes standard with Ratchet.
4-Wire Stepper Motor w/Flying LeadsHigh torque 1.8° 4-wire stepper motor, mounts & limit switches.
Customer supplies all drive electronics & wiring.
Integrated Motion Control Stepper MotorHigh torque 1.8° stepper motor with Integrated Motion Control and Driver Electronics.
Customer supplies communications & wiring.
Integrated Motion Control Stepper w/Controller (first axis)Includes power supply, Windows PC software, USB communications, motor pre-programming & all wiring and connectors.
DC MotorHigh torque 12 VDC gearmotor, mounts & limit switches.
Customer supplies all controls & wiring.
DC Motor w/Pendant & ControllerIncludes 12 VDC power supply, hand held pendant & all wiring and connectors.
Motor Mounts & Limit Switches only (no motor)- Nema 23 motor mount.
- Customer supplied motor.
- Consult factory for compatibility.
Manual (Standard)Comes standard with Ratchet.
4-Wire Stepper Motor w/Flying LeadsHigh torque 1.8° 4-wire stepper motor, mounts & limit switches.
Customer supplies all drive electronics & wiring.
Integrated Motion Control Stepper MotorHigh torque 1.8° stepper motor with Integrated Motion Control and Driver Electronics.
Customer supplies communications & wiring.
Integrated Motion Control Stepper w/Controller (first axis)Includes power supply, Windows PC software, USB communications, motor pre-programming & all wiring and connectors.
DC MotorHigh torque 12 VDC gearmotor, mounts & limit switches.
Customer supplies all controls & wiring.
DC Motor w/Pendant & ControllerIncludes 12 VDC power supply, hand held pendant & all wiring and connectors.
Motor Mounts & Limit Switches only (no motor)- Nema 23 motor mount.
- Customer supplied motor.
- Consult factory for compatibility.
Manual (Standard)Comes standard with Ratchet.
4-Wire Stepper Motor w/Flying LeadsHigh torque 1.8° 4-wire stepper motor, mounts & limit switches.
Customer supplies all drive electronics & wiring.
Integrated Motion Control Stepper MotorHigh torque 1.8° stepper motor with Integrated Motion Control and Driver Electronics.
Customer supplies communications & wiring.
Integrated Motion Control Stepper w/Controller (first axis)Includes power supply, Windows PC software, USB communications, motor pre-programming & all wiring and connectors.
DC MotorHigh torque 12 VDC gearmotor, mounts & limit switches.
Customer supplies all controls & wiring.
DC Motor w/Pendant & ControllerIncludes 12 VDC power supply, hand held pendant & all wiring and connectors.
Motor Mounts & Limit Switches only (no motor)- Nema 23 motor mount.
- Customer supplied motor.
- Consult factory for compatibility.
Manual (Standard)Comes standard with Ratchet.
4-Wire Stepper Motor w/Flying LeadsHigh torque 1.8° 4-wire stepper motor, mounts & limit switches.
Customer supplies all drive electronics & wiring.
Integrated Motion Control Stepper MotorHigh torque 1.8° stepper motor with Integrated Motion Control and Driver Electronics.
Customer supplies communications & wiring.
Integrated Motion Control Stepper w/Controller (first axis)Includes power supply, Windows PC software, USB communications, motor pre-programming & all wiring and connectors.
DC MotorHigh torque 12 VDC gearmotor, mounts & limit switches.
Customer supplies all controls & wiring.
DC Motor w/Pendant & ControllerIncludes 12 VDC power supply, hand held pendant & all wiring and connectors.
Motor Mounts & Limit Switches only (no motor)- Nema 23 motor mount.
- Customer supplied motor.
- Consult factory for compatibility.
Manual (Standard)Comes standard with Ratchet.
4-Wire Stepper Motor w/Flying LeadsHigh torque 1.8° 4-wire stepper motor, mounts & limit switches.
Customer supplies all drive electronics & wiring.
Integrated Motion Control Stepper MotorHigh torque 1.8° stepper motor with Integrated Motion Control and Driver Electronics.
Customer supplies communications & wiring.
Integrated Motion Control Stepper w/Controller (first axis)Includes power supply, Windows PC software, USB communications, motor pre-programming & all wiring and connectors.
DC MotorHigh torque 12 VDC gearmotor, mounts & limit switches.
Customer supplies all controls & wiring.
DC Motor w/Pendant & ControllerIncludes 12 VDC power supply, hand held pendant & all wiring and connectors.
Motor Mounts & Limit Switches only (no motor)- Nema 23 motor mount.
- Customer supplied motor.
- Consult factory for compatibility.
Manual (Standard)Comes standard with Ratchet.
4-Wire Stepper Motor w/Flying LeadsHigh torque 1.8° 4-wire stepper motor, mounts & limit switches.
Customer supplies all drive electronics & wiring.
Integrated Motion Control Stepper MotorHigh torque 1.8° stepper motor with Integrated Motion Control and Driver Electronics.
Customer supplies communications & wiring.
Integrated Motion Control Stepper w/Controller (first axis)Includes power supply, Windows PC software, USB communications, motor pre-programming & all wiring and connectors.
DC MotorHigh torque 12 VDC gearmotor, mounts & limit switches.
Customer supplies all controls & wiring.
DC Motor w/Pendant & ControllerIncludes 12 VDC power supply, hand held pendant & all wiring and connectors.
Motor Mounts & Limit Switches only (no motor)- Nema 34 motor mount.
- Customer supplied motor.
- Consult factory for com
Manual (Standard)Comes standard with Ratchet.
4-Wire Stepper Motor w/Flying LeadsHigh torque 1.8° 4-wire stepper motor, mounts & limit switches.
Customer supplies all drive electronics & wiring.
Integrated Motion Control Stepper MotorHigh torque 1.8° stepper motor with Integrated Motion Control and Driver Electronics.
Customer supplies communications & wiring.
Integrated Motion Control Stepper w/Controller (first axis)Includes power supply, Windows PC software, USB communications, motor pre-programming & all wiring and connectors.
DC MotorHigh torque 12 VDC gearmotor, mounts & limit switches.
Customer supplies all controls & wiring.
DC Motor w/Pendant & ControllerIncludes 12 VDC power supply, hand held pendant & all wiring and connectors.
Motor Mounts & Limit Switches only (no motor)- Nema 23 motor mount.
- Customer supplied motor.
- Consult factory for compatibility.
Manual (Standard)Comes standard with Ratchet.
4-Wire Stepper Motor w/Flying LeadsHigh torque 1.8° 4-wire stepper motor, mounts & limit switches.
Customer supplies all drive electronics & wiring.
Integrated Motion Control Stepper MotorHigh torque 1.8° stepper motor with Integrated Motion Control and Driver Electronics.
Customer supplies communications & wiring.
Integrated Motion Control Stepper w/Controller (first axis)Includes power supply, Windows PC software, USB communications, motor pre-programming & all wiring and connectors.
DC MotorHigh torque 12 VDC gearmotor, mounts & limit switches.
Customer supplies all controls & wiring.
DC Motor w/Pendant & ControllerIncludes 12 VDC power supply, hand held pendant & all wiring and connectors.
Motor Mounts & Limit Switches only (no motor)- Nema 34 motor mount.
- Customer supplied motor.
- Consult factory for compatibility.
Manual (Standard)Comes standard with Ratchet.
4-Wire Stepper Motor w/Flying LeadsHigh torque 1.8° 4-wire stepper motor, mounts & limit switches.
Customer supplies all drive electronics & wiring.
Integrated Motion Control Stepper MotorHigh torque 1.8° stepper motor with Integrated Motion Control and Driver Electronics.
Customer supplies communications & wiring.
Integrated Motion Control Stepper w/Controller (first axis)Includes power supply, Windows PC software, USB communications, motor pre-programming & all wiring and connectors.
DC MotorHigh torque 12 VDC gearmotor, mounts & limit switches.
Customer supplies all controls & wiring.
DC Motor w/Pendant & ControllerIncludes 12 VDC power supply, hand held pendant & all wiring and connectors.
Motor Mounts & Limit Switches only (no motor)- Nema 34 motor mount.
- Customer supplied motor.
- Consult factory for compatibility.
Manual (Standard)Comes standard with manual handwheel.
4-Wire Stepper Motor w/Flying LeadsHigh torque 1.8° 4-wire stepper motor, mounts & limit switches.
Customer supplies all drive electronics & wiring.
Integrated Motion Control Stepper MotorHigh torque 1.8° stepper motor with Integrated Motion Control and Driver Electronics.
Customer supplies communications & wiring.I
ntegrated Motion Control Stepper w/Controller (first axis)Includes power supply, Windows PC software, USB communications, motor pre-programming & all wiring and connectors.
DC MotorHigh torque 12 VDC gearmotor, mounts & limit switches.
Customer supplies all controls & wiring.
DC Motor w/Pendant & ControllerIncludes 12 VDC power supply, hand held pendant & all wiring and connectors.
Motor Mounts & Limit Switches only (no motor)- Nema 23 motor mount.
- Customer supplied motor.
- Consult factory for compatibility.
Manual (Standard)Comes standard with manual positioning knob.
Manual (Mic)
Comes with manual positioning micrometer.
Integrated Motion Control Stepper Motor
High torque 1.8° stepper motor with Integrated Motion Control and Driver Electronics.
Customer supplies communications & wiring.
Integrated Motion Control Stepper Motor with DRO
High torque 1.8° stepper motor with Integrated Motion Control and Driver Electronics.
With Digital Read Out
Customer supplies communications & wiring.
Motor Mounts & Limit Switches only (no motor)
- Nema 17 motor mount.
- Customer supplied motor.
- Consult factory for compatibility.
Manual (Standard)Comes standard with manual handwheel.
4-Wire Stepper Motor w/Flying LeadsHigh torque 1.8° 4-wire stepper motor, mounts & limit switches.
Customer supplies all drive electronics & wiring.
Integrated Motion Control Stepper MotorHigh torque 1.8° stepper motor with Integrated Motion Control and Driver Electronics.
Customer supplies communications & wiring.
Integrated Motion Control Stepper w/Controller (first axis)Includes power supply, Windows PC software, USB communications, motor pre-programming & all wiring and connectors.
DC MotorHigh torque 12 VDC gearmotor, mounts & limit switches.
Customer supplies all controls & wiring.
DC Motor w/Pendant & ControllerIncludes 12 VDC power supply, hand held pendant & all wiring and connectors.
Motor Mounts & Limit Switches only (no motor)- Nema 23 motor mount.
- Customer supplied motor.
- Consult factory for compatibility.
Manual (Standard)
Comes standard with manual motor.
4-Wire Stepper Motor w/Flying Leads
High torque 1.8° 4-wire stepper motor, mounts & limit switches.
Customer supplies all drive electronics & wiring.
Integrated Motion Control Stepper Motor
High torque 1.8° stepper motor with Integrated Motion Control and Driver Electronics.
Customer supplies communications & wiring.
Integrated Motion Control Stepper w/Controller (first axis)
Includes power supply, Windows PC software, USB communications, motor pre-programming & all wiring and connectors.
DC Motor
High torque 12 VDC gearmotor, mounts & limit switches.
Customer supplies all controls & wiring.
DC Motor w/Pendant & Controller
Includes 12 VDC power supply, hand held pendant & all wiring and connectors.
Motor Mounts & Limit Switches only (no motor)
Lorem ipsum dolor sit amet, consectetur adipiscing elit. Sed magna leo, tristique eu nisl vitae, tempus aliquam arcu. Cras vestibulum consequat libero, quis consequat massa.
