2.75″ (CF40) Z Translator
Includes rigid “backbone” (see example)
Inch and Metric Scale Included
Dimensions are in inches (mm)
Product Description
The BLT27S has the cantilever brackets bolted to the side of the flange leaving 75% of the circumference of the flange unobstructed. This allows the translator to mount in very close quarters without interfering with other, nearby flanges.
The bottom (or fixed) flange of the BLT27S is available with an optional 12-hole pattern for further flexibility in mounting orientation.
All BLT translators are also available with long strokes, motor drives, linear encoders, tapped flanges and special heights. Please contact the factory with your customization needs.
Despite its modest price, the BLT27S will provide years of trouble-free service.
Model BLT27S Translator DimensionsClear ID 1.53″ (38) |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
BLT27S Diagram
BLT Motor Drives
Bearing Retainer Flange
Related Products
-
ZA45
Starting At $4,125.00
BLT63
Starting At $3,825.00Circular Pattern vs. Square Pattern
XY Manipulator motions are defined as either Circular Pattern (sometimes called Vector Sum) or as Square Pattern.
For example, a manipulator with a ±0.5″ (±12.5 mm) of XY travel, Circular Pattern, will move the center of the translated device anywhere within a 1″ (25 mm) circle, as shown in the graphic, below. Note that the radial offset (the sum of the vectors) will remain constant while the individual X and Y offsets vary. For a manipulator with ±1.0″ (±25 mm) of XY travel, Circular Pattern, the values will be twice that of the ±0.5″ (±12.5 mm) values but the relationships will persist.
Unless specified otherwise, all MTS manipulators, as well as all other manufacturer’s manipulators are circular pattern. Also, the minimum bellows ID must equal twice the radial offset plus the diameter of the device to be translated. Be sure to keep this in mind when specifying a manipulator.
A manipulator with ±0.5″ (±12.5 mm) of XY travel, Square Pattern, will move the center of the translated device anywhere within a 1″ square so that when both the X and Y orthogonal offsets are at 0.5″ (12.5 mm), the bellows is actually offset 0.707″ (18 mm). As above, for a manipulator with ±1.0″ (±25 mm) of XY travel, the values will be twice that of the ±0.5″ (±12.5 mm) values, but the relationships will persist.
Manual (Standard)Comes standard with Handwheel.
4-Wire Stepper Motor w/Flying LeadsHigh torque 1.8° 4-wire stepper motor, mounts & limit switches.
Customer supplies all drive electronics & wiring.
Integrated Motion Control Stepper MotorHigh torque 1.8° stepper motor with Integrated Motion Control and Driver Electronics.
Customer supplies communications & wiring.
Integrated Motion Control Stepper w/Controller (first axis)Includes power supply, Windows PC software, USB communications, motor pre-programming & all wiring and connectors.
DC MotorHigh torque 12 VDC gearmotor, mounts & limit switches.
Customer supplies all controls & wiring.
DC Motor w/Pendant & ControllerIncludes 12 VDC power supply, hand held pendant & all wiring and connectors.
Motor Mounts & Limit Switches only (no motor)- Nema 23 motor mount.
- Customer supplied motor.
- Consult factory for compatibility.
Manual (Standard)Comes standard with Handwheel.
4-Wire Stepper Motor w/Flying LeadsHigh torque 1.8° 4-wire stepper motor, mounts & limit switches.
Customer supplies all drive electronics & wiring.
Integrated Motion Control Stepper MotorHigh torque 1.8° stepper motor with Integrated Motion Control and Driver Electronics.
Customer supplies communications & wiring.
Integrated Motion Control Stepper w/Controller (first axis)Includes power supply, Windows PC software, USB communications, motor pre-programming & all wiring and connectors.
DC MotorHigh torque 12 VDC gearmotor, mounts & limit switches.
Customer supplies all controls & wiring.
DC Motor w/Pendant & ControllerIncludes 12 VDC power supply, hand held pendant & all wiring and connectors.
Motor Mounts & Limit Switches only (no motor)- Nema 23 motor mount.
- Customer supplied motor.
- Consult factory for compatibility.
Manual (Standard)Comes standard with Handwheel.
4-Wire Stepper Motor w/Flying LeadsHigh torque 1.8° 4-wire stepper motor, mounts & limit switches.
Customer supplies all drive electronics & wiring.
Integrated Motion Control Stepper MotorHigh torque 1.8° stepper motor with Integrated Motion Control and Driver Electronics.
Customer supplies communications & wiring.
Integrated Motion Control Stepper w/Controller (first axis)Includes power supply, Windows PC software, USB communications, motor pre-programming & all wiring and connectors.
DC MotorHigh torque 12 VDC gearmotor, mounts & limit switches.
Customer supplies all controls & wiring.
DC Motor w/Pendant & ControllerIncludes 12 VDC power supply, hand held pendant & all wiring and connectors.
Motor Mounts & Limit Switches only (no motor)- Nema 23 motor mount.
- Customer supplied motor.
- Consult factory for compatibility.
Manual (Standard)Comes standard with Ratchet.
4-Wire Stepper Motor w/Flying LeadsHigh torque 1.8° 4-wire stepper motor, mounts & limit switches.
Customer supplies all drive electronics & wiring.
Integrated Motion Control Stepper MotorHigh torque 1.8° stepper motor with Integrated Motion Control and Driver Electronics.
Customer supplies communications & wiring.
Integrated Motion Control Stepper w/Controller (first axis)Includes power supply, Windows PC software, USB communications, motor pre-programming & all wiring and connectors.
DC MotorHigh torque 12 VDC gearmotor, mounts & limit switches.
Customer supplies all controls & wiring.
DC Motor w/Pendant & ControllerIncludes 12 VDC power supply, hand held pendant & all wiring and connectors.
Motor Mounts & Limit Switches only (no motor)- Nema 23 motor mount.
- Customer supplied motor.
- Consult factory for compatibility.
Manual (Standard)Comes standard with Ratchet.
4-Wire Stepper Motor w/Flying LeadsHigh torque 1.8° 4-wire stepper motor, mounts & limit switches.
Customer supplies all drive electronics & wiring.
Integrated Motion Control Stepper MotorHigh torque 1.8° stepper motor with Integrated Motion Control and Driver Electronics.
Customer supplies communications & wiring.
Integrated Motion Control Stepper w/Controller (first axis)Includes power supply, Windows PC software, USB communications, motor pre-programming & all wiring and connectors.
DC MotorHigh torque 12 VDC gearmotor, mounts & limit switches.
Customer supplies all controls & wiring.
DC Motor w/Pendant & ControllerIncludes 12 VDC power supply, hand held pendant & all wiring and connectors.
Motor Mounts & Limit Switches only (no motor)- Nema 23 motor mount.
- Customer supplied motor.
- Consult factory for compatibility.
Manual (Standard)Comes standard with Ratchet.
4-Wire Stepper Motor w/Flying LeadsHigh torque 1.8° 4-wire stepper motor, mounts & limit switches.
Customer supplies all drive electronics & wiring.
Integrated Motion Control Stepper MotorHigh torque 1.8° stepper motor with Integrated Motion Control and Driver Electronics.
Customer supplies communications & wiring.
Integrated Motion Control Stepper w/Controller (first axis)Includes power supply, Windows PC software, USB communications, motor pre-programming & all wiring and connectors.
DC MotorHigh torque 12 VDC gearmotor, mounts & limit switches.
Customer supplies all controls & wiring.
DC Motor w/Pendant & ControllerIncludes 12 VDC power supply, hand held pendant & all wiring and connectors.
Motor Mounts & Limit Switches only (no motor)- Nema 23 motor mount.
- Customer supplied motor.
- Consult factory for compatibility.
Manual (Standard)Comes standard with Ratchet.
4-Wire Stepper Motor w/Flying LeadsHigh torque 1.8° 4-wire stepper motor, mounts & limit switches.
Customer supplies all drive electronics & wiring.
Integrated Motion Control Stepper MotorHigh torque 1.8° stepper motor with Integrated Motion Control and Driver Electronics.
Customer supplies communications & wiring.
Integrated Motion Control Stepper w/Controller (first axis)Includes power supply, Windows PC software, USB communications, motor pre-programming & all wiring and connectors.
DC MotorHigh torque 12 VDC gearmotor, mounts & limit switches.
Customer supplies all controls & wiring.
DC Motor w/Pendant & ControllerIncludes 12 VDC power supply, hand held pendant & all wiring and connectors.
Motor Mounts & Limit Switches only (no motor)- Nema 23 motor mount.
- Customer supplied motor.
- Consult factory for compatibility.
Manual (Standard)Comes standard with Ratchet.
4-Wire Stepper Motor w/Flying LeadsHigh torque 1.8° 4-wire stepper motor, mounts & limit switches.
Customer supplies all drive electronics & wiring.
Integrated Motion Control Stepper MotorHigh torque 1.8° stepper motor with Integrated Motion Control and Driver Electronics.
Customer supplies communications & wiring.
Integrated Motion Control Stepper w/Controller (first axis)Includes power supply, Windows PC software, USB communications, motor pre-programming & all wiring and connectors.
DC MotorHigh torque 12 VDC gearmotor, mounts & limit switches.
Customer supplies all controls & wiring.
DC Motor w/Pendant & ControllerIncludes 12 VDC power supply, hand held pendant & all wiring and connectors.
Motor Mounts & Limit Switches only (no motor)- Nema 23 motor mount.
- Customer supplied motor.
- Consult factory for compatibility.
Manual (Standard)Comes standard with Ratchet.
4-Wire Stepper Motor w/Flying LeadsHigh torque 1.8° 4-wire stepper motor, mounts & limit switches.
Customer supplies all drive electronics & wiring.
Integrated Motion Control Stepper MotorHigh torque 1.8° stepper motor with Integrated Motion Control and Driver Electronics.
Customer supplies communications & wiring.
Integrated Motion Control Stepper w/Controller (first axis)Includes power supply, Windows PC software, USB communications, motor pre-programming & all wiring and connectors.
DC MotorHigh torque 12 VDC gearmotor, mounts & limit switches.
Customer supplies all controls & wiring.
DC Motor w/Pendant & ControllerIncludes 12 VDC power supply, hand held pendant & all wiring and connectors.
Motor Mounts & Limit Switches only (no motor)- Nema 34 motor mount.
- Customer supplied motor.
- Consult factory for com
Manual (Standard)Comes standard with Ratchet.
4-Wire Stepper Motor w/Flying LeadsHigh torque 1.8° 4-wire stepper motor, mounts & limit switches.
Customer supplies all drive electronics & wiring.
Integrated Motion Control Stepper MotorHigh torque 1.8° stepper motor with Integrated Motion Control and Driver Electronics.
Customer supplies communications & wiring.
Integrated Motion Control Stepper w/Controller (first axis)Includes power supply, Windows PC software, USB communications, motor pre-programming & all wiring and connectors.
DC MotorHigh torque 12 VDC gearmotor, mounts & limit switches.
Customer supplies all controls & wiring.
DC Motor w/Pendant & ControllerIncludes 12 VDC power supply, hand held pendant & all wiring and connectors.
Motor Mounts & Limit Switches only (no motor)- Nema 23 motor mount.
- Customer supplied motor.
- Consult factory for compatibility.
Manual (Standard)Comes standard with Ratchet.
4-Wire Stepper Motor w/Flying LeadsHigh torque 1.8° 4-wire stepper motor, mounts & limit switches.
Customer supplies all drive electronics & wiring.
Integrated Motion Control Stepper MotorHigh torque 1.8° stepper motor with Integrated Motion Control and Driver Electronics.
Customer supplies communications & wiring.
Integrated Motion Control Stepper w/Controller (first axis)Includes power supply, Windows PC software, USB communications, motor pre-programming & all wiring and connectors.
DC MotorHigh torque 12 VDC gearmotor, mounts & limit switches.
Customer supplies all controls & wiring.
DC Motor w/Pendant & ControllerIncludes 12 VDC power supply, hand held pendant & all wiring and connectors.
Motor Mounts & Limit Switches only (no motor)- Nema 34 motor mount.
- Customer supplied motor.
- Consult factory for compatibility.
Manual (Standard)Comes standard with Ratchet.
4-Wire Stepper Motor w/Flying LeadsHigh torque 1.8° 4-wire stepper motor, mounts & limit switches.
Customer supplies all drive electronics & wiring.
Integrated Motion Control Stepper MotorHigh torque 1.8° stepper motor with Integrated Motion Control and Driver Electronics.
Customer supplies communications & wiring.
Integrated Motion Control Stepper w/Controller (first axis)Includes power supply, Windows PC software, USB communications, motor pre-programming & all wiring and connectors.
DC MotorHigh torque 12 VDC gearmotor, mounts & limit switches.
Customer supplies all controls & wiring.
DC Motor w/Pendant & ControllerIncludes 12 VDC power supply, hand held pendant & all wiring and connectors.
Motor Mounts & Limit Switches only (no motor)- Nema 34 motor mount.
- Customer supplied motor.
- Consult factory for compatibility.
Manual (Standard)Comes standard with manual handwheel.
4-Wire Stepper Motor w/Flying LeadsHigh torque 1.8° 4-wire stepper motor, mounts & limit switches.
Customer supplies all drive electronics & wiring.
Integrated Motion Control Stepper MotorHigh torque 1.8° stepper motor with Integrated Motion Control and Driver Electronics.
Customer supplies communications & wiring.I
ntegrated Motion Control Stepper w/Controller (first axis)Includes power supply, Windows PC software, USB communications, motor pre-programming & all wiring and connectors.
DC MotorHigh torque 12 VDC gearmotor, mounts & limit switches.
Customer supplies all controls & wiring.
DC Motor w/Pendant & ControllerIncludes 12 VDC power supply, hand held pendant & all wiring and connectors.
Motor Mounts & Limit Switches only (no motor)- Nema 23 motor mount.
- Customer supplied motor.
- Consult factory for compatibility.
Manual (Standard)Comes standard with manual positioning knob.
Manual (Mic)
Comes with manual positioning micrometer.
Integrated Motion Control Stepper Motor
High torque 1.8° stepper motor with Integrated Motion Control and Driver Electronics.
Customer supplies communications & wiring.
Integrated Motion Control Stepper Motor with DRO
High torque 1.8° stepper motor with Integrated Motion Control and Driver Electronics.
With Digital Read Out
Customer supplies communications & wiring.
Motor Mounts & Limit Switches only (no motor)
- Nema 17 motor mount.
- Customer supplied motor.
- Consult factory for compatibility.
Manual (Standard)Comes standard with manual handwheel.
4-Wire Stepper Motor w/Flying LeadsHigh torque 1.8° 4-wire stepper motor, mounts & limit switches.
Customer supplies all drive electronics & wiring.
Integrated Motion Control Stepper MotorHigh torque 1.8° stepper motor with Integrated Motion Control and Driver Electronics.
Customer supplies communications & wiring.
Integrated Motion Control Stepper w/Controller (first axis)Includes power supply, Windows PC software, USB communications, motor pre-programming & all wiring and connectors.
DC MotorHigh torque 12 VDC gearmotor, mounts & limit switches.
Customer supplies all controls & wiring.
DC Motor w/Pendant & ControllerIncludes 12 VDC power supply, hand held pendant & all wiring and connectors.
Motor Mounts & Limit Switches only (no motor)- Nema 23 motor mount.
- Customer supplied motor.
- Consult factory for compatibility.
Manual (Standard)
Comes standard with manual motor.
4-Wire Stepper Motor w/Flying Leads
High torque 1.8° 4-wire stepper motor, mounts & limit switches.
Customer supplies all drive electronics & wiring.
Integrated Motion Control Stepper Motor
High torque 1.8° stepper motor with Integrated Motion Control and Driver Electronics.
Customer supplies communications & wiring.
Integrated Motion Control Stepper w/Controller (first axis)
Includes power supply, Windows PC software, USB communications, motor pre-programming & all wiring and connectors.
DC Motor
High torque 12 VDC gearmotor, mounts & limit switches.
Customer supplies all controls & wiring.
DC Motor w/Pendant & Controller
Includes 12 VDC power supply, hand held pendant & all wiring and connectors.
Motor Mounts & Limit Switches only (no motor)
Lorem ipsum dolor sit amet, consectetur adipiscing elit. Sed magna leo, tristique eu nisl vitae, tempus aliquam arcu. Cras vestibulum consequat libero, quis consequat massa.
