• BLT45S
  • BLT45S STEPPER MOTION CONTROL
  • BLT45S STEPPER 4 WIRE
  • BLT45S MOTOR BRACKET
  • BLT45S HANDCRANK

BLT45S

Starting At $2,700.00

4.5″ (CF63) Z Translator

Includes rigid “backbone” 

Inch and Metric Scale Included

Dimensions are in inches (mm)

*Prices are in U.S. Dollars

Contact Us for custom designs.

SKU: BLT45S Categories: , ,

Product Description

The newest member of the CF translator family, the BLT45S has the cantilever brackets (see drawing) bolted to the side of the flange. The advantage here is that the cantilever brackets leave 75% of the circumference of the flange unobstructed. This allows the translator to mount in very close quarters without interfering with other, nearby flanges.

The bottom (or fixed) flange of the BLT45S is available with an optional 16-hole pattern for further flexibility. Since the actuator cannot be repositioned relative to the bolt holes, the optional 16-hole feature allows the User more options in mounting orientation. Despite its modest price, the BLT45S will provide years of trouble-free service, especially if the simple maintenance is performed.

All MTS BLT lead screws use ball bearings. The lead screws and bearings are lubricated with high temperature grease for low friction and long life. All parts are field replaceable, including the bellows. All translators are also available with long strokes, motor drives, linear encoders, tapped flanges and special heights.

Maintenance:

The BLT45S needs only minimal maintenance. The linear bearings are self-lubricating and the guide rods and jacking screw need only be kept clean and free from dirt, dust and debris. The jacking screw and bearings do, however, need periodic lubrication.

As delivered, the screws are coated with but this coating will degrade over time, due to moisture in the atmosphere. After each bake out, lightly relubricate the screws with the (provided) high temperature grease. Be especially careful to not use a hydrocarbon grease such as Felpro C100TM unless you periodically clean the oxidized residue from all load-bearing surfaces. The normal bakeout temperature is 150°C but higher temperatures can be used, if needed. For bakeouts between 150°C and 210°C, increase the frequency and thoroughness of lubrication.
To thoroughly re-lubricate the bearings while the translator is under vacuum,

  • First move the translator to its fully extended position.
  • Place a spacer between the traveler and lower bracket. Wood or metal work well.
  • Remove the bearing retainer flange on the lower bracket.
  • Turn the knob counter-clockwise to extract the bearings from the lower bracket.
  • Work the factory-supplied grease into the bearing. Remember: a little goes a long way!
  • Replace the bearing, retainer and screws.
  • Remove the spacer.
  • Do science.

 

Model BLT45S Translator Dimensions

Model Stroke Compressed
BLT45S-02 2″ (50) 3.2″ (81)
BLT45S-03 3″ (75) 3.35″ (85)
BLT45S-04 4″ (100) 3.5″ (89)
BLT45S-06 6″ (150) 3.8″ (97)
BLT45S-08 8″ (200) 4.1″ (105)
BLT45S-12 12″ (300) 4.7″ (119)
BLT45S-16 16″ (400) 5.3″ (135)
BLT45S-24 24″ (600) 6.5″ (165)
 Clear I.D.  2.87″ (73)

XY Manipulator motions are defined as either Circular Pattern (sometimes called Vector Sum) or as Square Pattern.

For example, a manipulator with a ±0.5″ (±12.5 mm) of XY travel, Circular Pattern, will move the center of the translated device anywhere within a 1″ (25 mm) circle, as shown in the graphic, below. Note that the radial offset (the sum of the vectors) will remain constant while the individual X and Y offsets vary. For a manipulator with ±1.0″ (±25 mm) of XY travel, Circular Pattern, the values will be twice that of the ±0.5″ (±12.5 mm) values but the relationships will persist.

Unless specified otherwise, all MTS manipulators, as well as all other manufacturer’s manipulators are circular pattern. Also, the minimum bellows ID must equal twice the radial offset plus the diameter of the device to be translated. Be sure to keep this in mind when specifying a manipulator.

A manipulator with ±0.5″ (±12.5 mm) of XY travel, Square Pattern, will move the center of the translated device anywhere within a 1″ square so that when both the X and Y orthogonal offsets are at 0.5″ (12.5 mm), the bellows is actually offset 0.707″ (18 mm). As above, for a manipulator with ±1.0″ (±25 mm) of XY travel, the values will be twice that of the ±0.5″ (±12.5 mm) values, but the relationships will persist.

Circ-Square

ZA60 MANUALManual (Standard)

Comes standard with Handwheel.

 

 

 

 

 

 

 

 

ZA60 4 WIRE STEPPER4-Wire Stepper Motor w/Flying Leads

High torque 1.8° 4-wire stepper motor, mounts & limit switches.
Customer supplies all drive electronics & wiring.

 

 

 

 

 

 

 

 

ZA60 INTEGRATED STEPPERIntegrated Motion Control Stepper Motor

High torque 1.8° stepper motor with Integrated Motion Control and Driver Electronics.
Customer supplies communications & wiring.

 

 

 

 

 

 

 

 

ZA60 INTEGRATED STEPPER WITH CONTROLLERIntegrated Motion Control Stepper w/Controller (first axis)

Includes power supply, Windows PC software, USB communications, motor pre-programming & all wiring and connectors.

 

 

 

 

 

 

 

ZA60 DC MOTORDC Motor

High torque 12 VDC gearmotor, mounts & limit switches.
Customer supplies all controls & wiring.

 

 

 

 

 

 

 

 

ZA60 DC MOTOR WITH CONTROLLERDC Motor w/Pendant & Controller

Includes 12 VDC power supply, hand held pendant & all wiring and connectors.

 

 

 

 

 

 

 

ZA60 MOTOR MOUNTS AND SWITCHESMotor Mounts & Limit Switches only (no motor)

  • Nema 23 motor mount.
  • Customer supplied motor.
  • Consult factory for compatibility.

ZA45 MANUALManual (Standard)

Comes standard with Handwheel.

 

 

 

 

 

 

 

 

ZA45 4 WIRE STEPPER4-Wire Stepper Motor w/Flying Leads

High torque 1.8° 4-wire stepper motor, mounts & limit switches.
Customer supplies all drive electronics & wiring.

 

 

 

 

 

 

 

 

ZA45 INTEGRATED STEPPERIntegrated Motion Control Stepper Motor

High torque 1.8° stepper motor with Integrated Motion Control and Driver Electronics.
Customer supplies communications & wiring.

 

 

 

 

 

 

 

ZA45 INTEGRATED STEPPER WITH CONTROLLERIntegrated Motion Control Stepper w/Controller (first axis)

Includes power supply, Windows PC software, USB communications, motor pre-programming & all wiring and connectors.

 

 

 

 

 

 

 

ZA45 DC MOTORDC Motor

High torque 12 VDC gearmotor, mounts & limit switches.
Customer supplies all controls & wiring.

 

 

 

 

 

 

 

 

ZA45 DC MOTOR AND CONTROLLERDC Motor w/Pendant & Controller

Includes 12 VDC power supply, hand held pendant & all wiring and connectors.

 

 

 

 

 

 

 

ZA45 MOTOR MOUNTS AND SWITCHESMotor Mounts & Limit Switches only (no motor)

  • Nema 23 motor mount.
  • Customer supplied motor.
  • Consult factory for compatibility.

ZA12 MANUALManual (Standard)

Comes standard with Handwheel.

 

 

 

 

 

 

 

ZA12 4 WIRE STEPPER BACK4-Wire Stepper Motor w/Flying Leads

High torque 1.8° 4-wire stepper motor, mounts & limit switches.
Customer supplies all drive electronics & wiring.

 

 

 

 

 

 

 

 

ZA12 INTEGRATED STEPPERIntegrated Motion Control Stepper Motor

High torque 1.8° stepper motor with Integrated Motion Control and Driver Electronics.
Customer supplies communications & wiring.

 

 

 

 

 

 

 

 

ZA12 INTEGRATED STEPPER WITH CONTROLLERIntegrated Motion Control Stepper w/Controller (first axis)

Includes power supply, Windows PC software, USB communications, motor pre-programming & all wiring and connectors.

 

 

 

 

 

 

 

ZA12 DC MOTORDC Motor

High torque 12 VDC gearmotor, mounts & limit switches.
Customer supplies all controls & wiring.

 

 

 

 

 

 

 

ZA12 DC MOTOR WITH CONTROLLERDC Motor w/Pendant & Controller

Includes 12 VDC power supply, hand held pendant & all wiring and connectors.

 

 

 

 

 

 

 

ZA12 MOTOR MOUNTSMotor Mounts & Limit Switches only (no motor)

  • Nema 23 motor mount.
  • Customer supplied motor.
  • Consult factory for compatibility.

BLT 63 MANUALManual (Standard)

Comes standard with Ratchet.

 

 

 

 

 

 

 

 

BLT 63 4 WIRE STEPPER4-Wire Stepper Motor w/Flying Leads

High torque 1.8° 4-wire stepper motor, mounts & limit switches.
Customer supplies all drive electronics & wiring.

 

 

 

 

 

 

 

 

BLT 63 INTEGRATED STEPPERIntegrated Motion Control Stepper Motor

High torque 1.8° stepper motor with Integrated Motion Control and Driver Electronics.
Customer supplies communications & wiring.

 

 

 

 

 

 

BLT 63 INTEGRATED STEPPER WITH CONTROLLERIntegrated Motion Control Stepper w/Controller (first axis)

Includes power supply, Windows PC software, USB communications, motor pre-programming & all wiring and connectors.

 

 

 

 

 

 

 

BLT 63 DC MOTORDC Motor

High torque 12 VDC gearmotor, mounts & limit switches.
Customer supplies all controls & wiring.

 

 

 

 

 

 

 

 

BLT 63 DC MOTOR WITH CONTROLLERDC Motor w/Pendant & Controller

Includes 12 VDC power supply, hand held pendant & all wiring and connectors.

 

 

 

 

 

 

BLT 63 MOTOR MOUNTS AND SWITCHESMotor Mounts & Limit Switches only (no motor)

  • Nema 23 motor mount.
  • Customer supplied motor.
  • Consult factory for compatibility.

BLT 45 MANUALManual (Standard)

Comes standard with Ratchet.

 

 

 

 

 

 

 

 

BLT 45 4 WIRE STEPPER4-Wire Stepper Motor w/Flying Leads

High torque 1.8° 4-wire stepper motor, mounts & limit switches.
Customer supplies all drive electronics & wiring.

 

 

 

 

 

 

 

 

BLT 45 INTEGRATED STEPPERIntegrated Motion Control Stepper Motor

High torque 1.8° stepper motor with Integrated Motion Control and Driver Electronics.
Customer supplies communications & wiring.

 

 

 

 

 

 

 

 

BLT 45 INTEGRATED STEPPER WITH CONTROLLERIntegrated Motion Control Stepper w/Controller (first axis)

Includes power supply, Windows PC software, USB communications, motor pre-programming & all wiring and connectors.

 

 

 

 

 

 

 

BLT 45 DC MOTORDC Motor

High torque 12 VDC gearmotor, mounts & limit switches.
Customer supplies all controls & wiring.

 

 

 

 

 

 

 

BLT 45 DC MOTOR WITH CONTROLLERDC Motor w/Pendant & Controller

Includes 12 VDC power supply, hand held pendant & all wiring and connectors.

 

 

 

 

 

 

BLT 45 MOTOR MOUNT AND SWITCHESMotor Mounts & Limit Switches only (no motor)

  • Nema 23 motor mount.
  • Customer supplied motor.
  • Consult factory for compatibility.

BLT 026 MANUALManual (Standard)

Comes standard with Ratchet.

 

 

 

 

 

 

 

BLT 026 STEPPER MOTOR4-Wire Stepper Motor w/Flying Leads

High torque 1.8° 4-wire stepper motor, mounts & limit switches.
Customer supplies all drive electronics & wiring.

 

 

 

 

 

 

 

BLT 026 INTEGRATED STEPPERIntegrated Motion Control Stepper Motor

High torque 1.8° stepper motor with Integrated Motion Control and Driver Electronics.
Customer supplies communications & wiring.

 

 

 

 

 

 

BLT 026 INTEGRATED STEPPER WITH CONTROLLERIntegrated Motion Control Stepper w/Controller (first axis)

Includes power supply, Windows PC software, USB communications, motor pre-programming & all wiring and connectors.

 

 

 

 

 

BLT 026 DC MOTORDC Motor

High torque 12 VDC gearmotor, mounts & limit switches.
Customer supplies all controls & wiring.

 

 

 

 

 

 

BLT 026 DC MOTOR WITH CONTROLLERDC Motor w/Pendant & Controller

Includes 12 VDC power supply, hand held pendant & all wiring and connectors.

 

 

 

 

 

 

BLT 026 MOTOR MOUNTS AND SWITCHESMotor Mounts & Limit Switches only (no motor)

  • Nema 23 motor mount.
  • Customer supplied motor.
  • Consult factory for compatibility.

BLT 456 MANUALManual (Standard)

Comes standard with Ratchet.

 

 

 

 

 

 

 

BLT 456 4 WIRE STEPPER4-Wire Stepper Motor w/Flying Leads

High torque 1.8° 4-wire stepper motor, mounts & limit switches.
Customer supplies all drive electronics & wiring.

 

 

 

 

 

 

BLT 456 INTEGRATED STEPPERIntegrated Motion Control Stepper Motor

High torque 1.8° stepper motor with Integrated Motion Control and Driver Electronics.
Customer supplies communications & wiring.

 

 

 

 

 

 

BLT 456 INTEGRATED STEPPER WITH CONTROLLERIntegrated Motion Control Stepper w/Controller (first axis)

Includes power supply, Windows PC software, USB communications, motor pre-programming & all wiring and connectors.

 

 

 

 

 

 

BLT 456 DC MOTORDC Motor

High torque 12 VDC gearmotor, mounts & limit switches.
Customer supplies all controls & wiring.

 

 

 

 

 

 

 

BLT 456 DC MOTOR WITH CONTROLLERDC Motor w/Pendant & Controller

Includes 12 VDC power supply, hand held pendant & all wiring and connectors.

 

 

 

 

 

 

BLT 456 MOTOR MOUNTS AND SWITCHESMotor Mounts & Limit Switches only (no motor)

  • Nema 23 motor mount.
  • Customer supplied motor.
  • Consult factory for compatibility.

BLT 452 MANUALManual (Standard)

Comes standard with Ratchet.

 

 

 

 

 

 


BLT 452 4 WIRE STEPPER4-Wire Stepper Motor w/Flying Leads

High torque 1.8° 4-wire stepper motor, mounts & limit switches.
Customer supplies all drive electronics & wiring.

 

 

 

 

 

 

 

 

BLT 452 INTEGRATED STEPPERIntegrated Motion Control Stepper Motor

High torque 1.8° stepper motor with Integrated Motion Control and Driver Electronics.
Customer supplies communications & wiring.

 

 

 

 

 

 

 

 

BLT 452 INTEGRATED STEPPER WITH CONTROLLERIntegrated Motion Control Stepper w/Controller (first axis)

Includes power supply, Windows PC software, USB communications, motor pre-programming & all wiring and connectors.

 

 

 

 

 

 

 

BLT 452 DC MOTORDC Motor

High torque 12 VDC gearmotor, mounts & limit switches.
Customer supplies all controls & wiring.

 

 

 

 

 

 

 

BLT 452 DC MOTOR WITH CONTROLLERDC Motor w/Pendant & Controller

Includes 12 VDC power supply, hand held pendant & all wiring and connectors.

 

 

 

 

 

 

 


BLT 452 MOTOR MOUNTS AND SWITCHESMotor Mounts & Limit Switches only (no motor)

  • Nema 23 motor mount.
  • Customer supplied motor.
  • Consult factory for compatibility.

BLT 106 MANUAL Manual (Standard)

Comes standard with Ratchet.

 

 

 

 

 


BLT 106 4 WIRE STEPPER4-Wire Stepper Motor w/Flying Leads

High torque 1.8° 4-wire stepper motor, mounts & limit switches.
Customer supplies all drive electronics & wiring.

 

 

 

 

 

 

 

BLT 106 INTEGRATED MOTION CONTROL STEPPERIntegrated Motion Control Stepper Motor

High torque 1.8° stepper motor with Integrated Motion Control and Driver Electronics.
Customer supplies communications & wiring.

 

 

 

 

 

 

 

BLT 106 INTEGRATED STEPPER WITH CONTROLLERIntegrated Motion Control Stepper w/Controller (first axis)

Includes power supply, Windows PC software, USB communications, motor pre-programming & all wiring and connectors.

 

 

 

 

 

 

 

BLT 106 DC MOTORDC Motor

High torque 12 VDC gearmotor, mounts & limit switches.
Customer supplies all controls & wiring.

 

 

 

 

 

 

 

BLT 106 DC MOTOR WITH CONTROLLERDC Motor w/Pendant & Controller

Includes 12 VDC power supply, hand held pendant & all wiring and connectors.

 

 

 

 

 

 


BLT 106 MOTOR MOUNT AND SWITCHESMotor Mounts & Limit Switches only (no motor)

  • Nema 34 motor mount.
  • Customer supplied motor.
  • Consult factory for com

BLT 0266 MANUAL Manual (Standard)

Comes standard with Ratchet.

 

 

 

 

 

 

 

 

BLTM 0266 4 WIRE STEPPER4-Wire Stepper Motor w/Flying Leads

High torque 1.8° 4-wire stepper motor, mounts & limit switches.
Customer supplies all drive electronics & wiring.

 

 

 

 

 

 

 

BLTM 0266 INTEGRATED MOTION CONTROL STEPPERIntegrated Motion Control Stepper Motor

High torque 1.8° stepper motor with Integrated Motion Control and Driver Electronics.
Customer supplies communications & wiring.

 

 

 

 

 

 

 

BLTM 0266 INTEGRATED STEPPER AND CONTROLLERIntegrated Motion Control Stepper w/Controller (first axis)

Includes power supply, Windows PC software, USB communications, motor pre-programming & all wiring and connectors.

 

 

 

 

 

 

 

BLTM 0266 DC MOTORDC Motor

High torque 12 VDC gearmotor, mounts & limit switches.
Customer supplies all controls & wiring.

 

 

 

 

 

 

 

BLTM 0266 DC MOTOR AND CONTROLLERDC Motor w/Pendant & Controller

Includes 12 VDC power supply, hand held pendant & all wiring and connectors.

 

 

 

 

 

 

BLTM 0266 MOTOR MOUNTS AND SWITCHESMotor Mounts & Limit Switches only (no motor)

  • Nema 23 motor mount.
  • Customer supplied motor.
  • Consult factory for compatibility.

BLT66 MANUALManual (Standard)

Comes standard with Ratchet.

 

 

 

 

 

 

BLTM66 4 WIRE STEPPER 4-Wire Stepper Motor w/Flying Leads

High torque 1.8° 4-wire stepper motor, mounts & limit switches.
Customer supplies all drive electronics & wiring.

 

 

 

 

 

 

BLTM66 INTEGRATED MOTION CONTROL STEPPERIntegrated Motion Control Stepper Motor

High torque 1.8° stepper motor with Integrated Motion Control and Driver Electronics.
Customer supplies communications & wiring.

 

 

 

 

 

 

BLTM66 INTEGRATED MOTION CONTROL STEPPER WITH CONTROLLERIntegrated Motion Control Stepper w/Controller (first axis)

Includes power supply, Windows PC software, USB communications, motor pre-programming & all wiring and connectors.

 

 

 

 

 

 

BLTM66 DC MOTORDC Motor

High torque 12 VDC gearmotor, mounts & limit switches.
Customer supplies all controls & wiring.

 

 

 

 

 

 

BLTM66 DC MOTOR WITH CONTROLLERDC Motor w/Pendant & Controller

Includes 12 VDC power supply, hand held pendant & all wiring and connectors.

 

 

 

 

 

BLTM66 MOTOR MOUNTS AND SWITCHESMotor Mounts & Limit Switches only (no motor)

  • Nema 34 motor mount.
  • Customer supplied motor.
  • Consult factory for compatibility.

BLT86 MANUALManual (Standard)

Comes standard with Ratchet.

 

 

 

 

 

 



BLT86 4 WIRE STEPPER4-Wire Stepper Motor w/Flying Leads

High torque 1.8° 4-wire stepper motor, mounts & limit switches.
Customer supplies all drive electronics & wiring.

 

 

 

 

 

 

 

BLT86 INTEGRATED MOTION CONTROL STEPPERIntegrated Motion Control Stepper Motor

High torque 1.8° stepper motor with Integrated Motion Control and Driver Electronics.
Customer supplies communications & wiring.

 

 

 

 

 

 

 

BLT86 INTEGRATED STEPPER WITH CONTROLLERIntegrated Motion Control Stepper w/Controller (first axis)

Includes power supply, Windows PC software, USB communications, motor pre-programming & all wiring and connectors.

 

 

 

 

 

 

 

BLT86 DC MOTORDC Motor

High torque 12 VDC gearmotor, mounts & limit switches.
Customer supplies all controls & wiring.

 

 

 

 

 

 

 

BLT86 DC MOTOR WITH CONTROLLER AND PENDANTDC Motor w/Pendant & Controller

Includes 12 VDC power supply, hand held pendant & all wiring and connectors.

 

 

 

 

 

 



BLT86 MOTOR MOUNTS AND LIMIT SWITCHES ONLYMotor Mounts & Limit Switches only (no motor)

  • Nema 34 motor mount.
  • Customer supplied motor.
  • Consult factory for compatibility.

BLT45S HANDCRANKManual (Standard)

Comes standard with manual handwheel.

 

 

 

 

 

 

 


BLT45S STEPPER 4 WIRE
4-Wire Stepper Motor w/Flying Leads

High torque 1.8° 4-wire stepper motor, mounts & limit switches.
Customer supplies all drive electronics & wiring.

 

 

 

 

 

 

 

BLT45S STEPPER MOTION CONTROLIntegrated Motion Control Stepper Motor

High torque 1.8° stepper motor with Integrated Motion Control and Driver Electronics.
Customer supplies communications & wiring.

 

 

 

 

 

 

Iblt45s-integrated-motion-control-w-controllerntegrated Motion Control Stepper w/Controller (first axis)

Includes power supply, Windows PC software, USB communications, motor pre-programming & all wiring and connectors.

 

 

 

 

 

 

blt45s-dc-motorDC Motor

High torque 12 VDC gearmotor, mounts & limit switches.
Customer supplies all controls & wiring.

 

 

 

 

 

 

blt45s-dc-motor-w-pendant-controllerDC Motor w/Pendant & Controller

Includes 12 VDC power supply, hand held pendant & all wiring and connectors.

 

 

 

 

 

 


BLT45S MOTOR BRACKET
Motor Mounts & Limit Switches only (no motor)

  • Nema 23 motor mount.
  • Customer supplied motor.
  • Consult factory for compatibility.

blt27s-d

BLT 13S KNOB ACTUATORManual (Standard)

Comes standard with manual positioning knob.

 

 

 

 

 

 

 

BLT 13S MIC ACTUATOR

Manual (Mic)

Comes with manual positioning micrometer.

 

 

 

 

 

 

BLTM13S WITH STEPPER MOTOR

Integrated Motion Control Stepper Motor

High torque 1.8° stepper motor with Integrated Motion Control and Driver Electronics.
Customer supplies communications & wiring.

 

 

 

 

BLTM13S WITH DRO

Integrated Motion Control Stepper Motor with DRO

High torque 1.8° stepper motor with Integrated Motion Control and Driver Electronics.

With Digital Read Out
Customer supplies communications & wiring.

 

 

 

 

 

 

 

BLTM13S MOTOR MOUNT ONLY

Motor Mounts & Limit Switches only (no motor)

  • Nema 17 motor mount.
  • Customer supplied motor.
  • Consult factory for compatibility.

Manual (Standard)

Comes standard with manual handwheel.

 

 

 

 

 

 

 

BLT 27S 4 WIRE STEPPER WITH FLYING LEADS4-Wire Stepper Motor w/Flying Leads

High torque 1.8° 4-wire stepper motor, mounts & limit switches.
Customer supplies all drive electronics & wiring.

 

 

 

 

 

 

 

BLT 27S INTEGRATED MOTION CONTROL STEPPERIntegrated Motion Control Stepper Motor

High torque 1.8° stepper motor with Integrated Motion Control and Driver Electronics.
Customer supplies communications & wiring.

 

 

 

 

 

 

 

BLT 27S INTEGRATED STEPPER WITH CONTROLLERIntegrated Motion Control Stepper w/Controller (first axis)

Includes power supply, Windows PC software, USB communications, motor pre-programming & all wiring and connectors.

 

 

 

 

 

 

 

BLT 27S DC MOTORDC Motor

High torque 12 VDC gearmotor, mounts & limit switches.
Customer supplies all controls & wiring.

 

 

 

 

 

 

 

BLT 27S DC MOTOR WITH PENDANT AND CONTROLLERDC Motor w/Pendant & Controller

Includes 12 VDC power supply, hand held pendant & all wiring and connectors.

 

 

 

 

 

 

 

BLT 27S MOTOR MOUNTS AND LIMIT SWITCHES ONLYMotor Mounts & Limit Switches only (no motor)

  • Nema 23 motor mount.
  • Customer supplied motor.
  • Consult factory for compatibility.

Manual (Standard)

Comes standard with manual motor.

4-Wire Stepper Motor w/Flying Leads

High torque 1.8° 4-wire stepper motor, mounts & limit switches.
Customer supplies all drive electronics & wiring.

Integrated Motion Control Stepper Motor

High torque 1.8° stepper motor with Integrated Motion Control and Driver Electronics.
Customer supplies communications & wiring.

Integrated Motion Control Stepper w/Controller (first axis)

Includes power supply, Windows PC software, USB communications, motor pre-programming & all wiring and connectors.

DC Motor

High torque 12 VDC gearmotor, mounts & limit switches.
Customer supplies all controls & wiring.

DC Motor w/Pendant & Controller

Includes 12 VDC power supply, hand held pendant & all wiring and connectors.

Motor Mounts & Limit Switches only (no motor)

Lorem ipsum dolor sit amet, consectetur adipiscing elit. Sed magna leo, tristique eu nisl vitae, tempus aliquam arcu. Cras vestibulum consequat libero, quis consequat massa.

BLT 27S MANUAL  -Backbone